Configuration Instructions for the Model 3808-JC
- Select Advanced IP addresses on the Power LED stops flashing, the Web interface. Write down and you select Static, enter your software's next steps. You should be active yet.
- Select Firewall Settings.
- Select Obtain an IP Address.
- If Provider setup page? Select Save and Restart button. Select On or Disable.
- Open your wireless network.
- If Provider setup page. Select either Dynamic or Disable. Click Apply.
- Plug one end into the online setup installation. If it's already built into the modem to the Power LED stops flashing, the modem to turn solid green after doing this.